No products
More info
This advanced diagnostic tool for optical fibres allows the Fibre Engineer to take a snapshot of a fibre link.The OTDR sends short pulses of light down one end of a fibre at a specified repetition rate.Light reflected back from fibre discontinuities and light continuously back scattered from the fibre itself travels back to the OTDR, where the instrument records the optical power and arrival time.The arrival time of the pulse from a given point in the fibre is related to its distance from the OTDR.With this information, the OTDR graphically displays returned power versus distance.OTDRs are well-equipped for troubleshooting problems because they allow you to visually locate reflective events like connections and fibre breaks and non-reflective events like splices and tight bends by studying the graphical trace. The power difference between two points on the trace is an estimate of optical loss.
●1310/1550/1625 nm wavelength
●Test through 1*64 PLC splitter in PON test
●Internal memory can store up to 10000 waveforms
●High contrast color TFT LCD
●USB port connect to PC
●Input laser signal auto detection and self-protection function
●Built-in VFL
●User-friendly OTDR simulation software shows details of events
 |
||
| SPECIFICATIONS | ||
| Model | AOR500-PB | AOR500-PC |
| Dynamic Range* | 35dB / 34dB / 34dB | 38dB / 37dB / 37dB |
| Max.Distance** | 120km | 140km |
| Wavelength | 1550/1310/1625nm, 1625nm with filter | |
| Event Dead Zone ** | 1.5m | |
| Attenuation Dead Zone | 8.0m | |
| Pulse Width | 10ns, 25ns, 50ns, 100ns, 250ns, 500ns, 1us, 2.5us, 5us, 10us | |
| Distance uncertainty | ±(0.8m ± 0.001% * testing distance ± resolution) | |
| Loss Resolution | 0.001dB | |
| Min.Distance Resolution | 1m | |
| Connector | FC/PC (1310/1550), FC/APC (1625) interchangeable adapter (optional: SC,ST,LC interchangeable adapters) | |
| VFL | 1mW | |
| Data Storage | > 10000 traces (standard 1GB SD card) | |
| Display | 3.5 inch TFT color LCD | |
| Interface | USB | |
| Battery | Built-in rechargeable battery | |
| Working Time | >10 hrs (Bellcore TR-NWT-001138) | |
* pulse width 10us, average time>5 minutes, SNR=1, 23°C±2°C
** at 1550nm, one fiber without adapter and splicing connection inside
** pulse width 10ns, terminal refection loss>40dB
| GENERAL SPECIFICATIONS | |
| Size(H*W*D) | 197mm * 107mm * 67mm |
| Weight | About 750g |
| Storage Temperature | -20°C -- +60°C , < 90%RH |
| Operating Temperature | -10°C -- +50°C , < 90%RH |
| ACCESSORIES | |
| Standard | Optional |
| AC/DC adapter with power cord *1 | SC interchangeable connector *1 |
| Operation guide *1 | ST interchangeable connector *1 |
| Carrying bag *1 | LC interchangeable connector *1 |
| Certificate of Calibration *1 | |
| USB cable *1 | |
| SD card *1 | |
